Embroidery vs Print for Team T-Shirts
Most team organisers assume printing is the only option. It is not.
For custom team t-shirts with large graphic prints, full-colour crests, or budgets under £8 per piece, screen printing or DTG is the right call. For chest logos worn 50-plus times on corporate or club shirts, embroidery holds colour better, resists washing, and signals a quality level that ink rarely matches.
What Embroidery Offers
Embroidery stitches thread directly into the fabric. A standard chest logo runs 5,000 to 15,000 stitches and takes around 90 seconds per garment on a commercial machine. Because there is no ink layer, the colour cannot crack or peel. After 100 washes the logo looks the same as day one. The texture is raised and three-dimensional, which reads as premium from two metres away.
The constraints are firm. Features below 4 mm cannot be reproduced cleanly. Gradients and photographic images are out of scope entirely. Very lightweight fabrics pucker under the tension of stitching, so anything below 180 gsm usually needs an interfacing backing. A blank heavyweight like the Gildan 5000 Heavy Cotton T-Shirt (185 gsm) gives the needle something to grip.
What Printing Offers
Printing handles what embroidery cannot. A full-back design, a 10-colour gradient crest, or a name-and-number block: all straightforward for screen printing or DTG. Screen-print setup is paid once and spread across quantity, so cost per unit drops sharply at 24 pieces and again at 50. For events ordering 100 shirts, the per-unit price difference versus embroidery is typically £4 to £7 per garment.
Print durability has improved considerably over the past decade. Water-based inks on a good polyester-cotton blend, washed inside-out at 30 degrees, regularly last 60-plus washes. The Fruit of the Loom Original Valueweight T-Shirt in 165 gsm is widely used for event shirts precisely because it holds ink well at a sensible blank price.
Quick Comparison
| Factor | Embroidery | Print (screen / DTG) |
|---|---|---|
| Minimum order | 1 piece (digitising fee applies) | 1 piece (DTG) or 12–24 (screen) |
| Detail capability | Low (minimum 4 mm feature) | High (photorealistic possible) |
| Wash durability | Excellent (100+ washes) | Good with care (50–80 washes) |
| Typical cost per piece | £6–£14 (varies by stitch count) | £3–£9 (varies by colour + quantity) |
| Best for | Chest logos, corporate wear, club polos | Large designs, events, sports backs |
Which Method to Choose
Choose embroidery when the shirt will be worn repeatedly, the logo sits within a 100 mm box, and the occasion is professional. Corporate welcome kits and hospitality uniforms both suit it.
Choose printing when the design is large, the event is a one-off, or you need to hold cost across 50-plus pieces. Charity runs and festival crew shirts are the classic print brief.
Some orders combine both: an embroidered chest logo for brand presence, a printed back design for event-specific detail. It costs more, but the result looks deliberately considered. The Gildan Heavy Cotton range handles both decoration types at a sensible per-unit price, which is why it is the most common blank choice for mixed-method runs.
FAQ
Can you embroider directly onto a jersey or sports t-shirt?
Yes, but performance fabrics such as polyester mesh need a cut-away or tear-away stabiliser behind the stitching to stop the weave distorting. Most professional embroiderers include this as standard; confirm before you order.
Is embroidery cheaper for small orders?
No. Embroidery has a one-off digitising fee, typically £25 to £50 per design, plus a higher per-piece rate than print. For quantities under 12 pieces, DTG printing is almost always the lower-cost route.
What file do I need to supply for embroidery?
Your embroiderer converts your artwork into a stitch file (formats such as.DST or.EMB). You can supply a high-resolution vector or a clean PNG and the digitiser handles conversion. The cleaner your original, the more accurate the stitch map.
How big can an embroidered logo be on a t-shirt?
Chest logos typically sit within a 100 x 100 mm area. Larger embroideries are possible but add stitches, raise cost, and stiffen the fabric noticeably. For most team shirts, 80 mm wide is the practical limit before the garment starts to feel stiff at the chest.
Does printed text crack on team shirts over time?
Cheap plastisol prints on over-stretched fabric do crack. Water-based or discharge inks on a 180 to 200 gsm cotton shirt, washed at 30 degrees and turned inside-out, hold up well past 60 washes under normal use.
Related Products
185 gsm blank tee suitable for both screen printing and embroidery
View on Amazon165 gsm lightweight option popular for event and charity run print orders
View on AmazonGet a quote for custom printed or embroidered team shirts in any quantity
Get a Quote